Vi er producenter af hydrauliske metalpressere i Kina.
Vores Y83T-160 ballepresser til hydraulisk skrot er populær i metalbearbejdnings- og genbrugsstationen, smelteanlæg til metal med lille og mellemstor produktion. Den er konfigureret med komprimeringsboksen i størrelsen 1600mm × 1000mm × 800mm. Den færdige balle er ca. 400 mm × 400 mm i størrelse.
Both the manual manipulation and the PLC automatic operation are available. Moreover, this scrap metal baler can be equipped with the motor with the optional power like 30kw or 37kw according to the production.
160ton push out scrap metal baler for scrap metal:
Technical Parameters:
Y83/T-160 Scrap Metal Baler |
|
Model |
Y83 / T-160 |
Cylinderens skubbekraft |
1600KN |
Maksimalt arbejdstryk |
25MPa |
Komprimér rumstørrelse |
1600×1000×800mm |
Bale dimensions (L×W×H) |
400 × 400 mm |
Motor |
22 kW |
Capacity |
5ton/h |
Teoretisk tør cyklustid |
110s |
Max. thickness can be press |
4 mm |
Driftsmetode |
PLC Auto Control |
Bale discharging method |
Skubbe ud |
Pressedimensioner (L×W×H) |
4630×4357×2400mm |
Vægt |
12000KG |
1. This side push out baler adopts the hydraulic drive system, reasonable design and compact structure. It is characterized by small volume, light weight, small inertia of movement, low noise, high moving stability, operating flexibility and other strong points.
2. With the incorporated hydraulic and electrical control, this machine is user-friendly and it is easy to realize the overload protection.
3. It is well adapted to different working conditions and has wide applicable range, like processing equipment in the metal recycling and processing unit, furnace charge processing machine in foundry, etc.
4. Vores presser på siden er energibesparende, praktisk til installation, sikker, pålidelig og effektiv under arbejde.
Brief Introduction of Baling Process
At first, the waste material for baling should be loaded into the compacting box manually or mechanically. The Lid cylinder starts to revolve the Lid to the right position for sealing the compacting box completely. Then the ejectors of the side cylinder and the main cylinder squeeze the waste materials into bale. Relying on the locking door cylinder, the locking door will be opened. The ejector of the main cylinder will push the bale out of the compacting box, finishing the baling process.
Ekstraudstyr
Fodring af transportbånd
Olievarmer
Oliekøler
Dieselmotordrev
Applications
Non Ferrous Metals
Coppers
Aluminium dåser
Aluminum Windows
Scrap Aluminums
25 liters tromler
Tin Cans
Steel Shavings
Aluminum Chips
Aluminiumsplader
Aluminium og kobbertråde