Hydraulisk skrotmetalskæremaskine Genbrugsudstyr til tungmetal

Purpose: This series of models can cut all kinds of scrap metal. After the cover is closed and the manometer is extruded in 2 and 3 directions, it is compressed into blocks, which are finally sheared or directly crushed to become qualified scrap steel. .
Klippemaskinen bruges hovedsageligt til: komprimering og skæring af skrot, skæring af forskellige stænger og profiler og komprimering af en stor mængde metalskrot til en lang blok, let stålskrot pakkes i blokke, og skrotbiler ekstruderes til biler brikettering. Ud over skærefunktionen har den tunge affaldsskær en ekstruderingsfunktion, som kan presse et antal uregelmæssige små stålskrot i skraldespanden til klipning. De klemte og klipte stålrester, overfladerust og andre skadelige stoffer kan delvist falde af, forbedrer renheden af ​​skrotstål. Det bruges til at skære tungt affald i forskellige størrelser og kan helt erstatte flammeskæring. Det er sikkert og effektivt med stålgrebemaskine eller gaffeltruckfodring.
Portalsaks, også kendt som portionsaks, bruges hovedsageligt til at kombinere alle former for fast affalds jern, tungt affald, let og tyndt stål, skrotbilskaller, store letmetalkonstruktioner lavet af stål, profiler, produktion og husholdningsskrotstål, forskellige plast Komprimering, pakning og skæring af ikke-jernholdige metaller (rustfrit stål, aluminiumslegering, kobber osv.) er i overensstemmelse med de gældende specifikationer for afgiften. Det er et ideelt udstyr til stålværker, ikke-jernholdige metalsmelteindustrier, støbningsindustrier og råvareproducenter.

Features

1. Hele maskinen vedtager stålpladekombineret svejsestruktur, hele maskinen har høj stivhed, og de svejsede dele behandles med kunstig aldringsglødning, hvilket eliminerer svejsespændingen, og maskinens nøjagtighed er god og stabil.

2. Klinger lavet af værktøjsstål har lang levetid og holdbarhed.

3. Knivgabet er justerbart, hvilket forbedrer maskinværktøjets nøjagtighed og knivens levetid.

4. Hovedrammen på materialeboksen er svejset af strukturelt stål, og den indvendige æskevæg er lavet af ultrahøj slidstærk NM500 stålplade, som nævner materialeboksens slidstyrke. Bevægelsen af ​​materialeboksens skubhoved drives af et uafhængigt hydraulisk system gennem en hydraulisk motor og en kæde. Bevægelsen er jævn, og skubbestørrelsen styres automatisk, og den har en meget pålidelig beskyttelse mod overbelastning.

5. Self-designed hydraulic system with independent intellectual property rights. The main shearing cylinder adopts a differential circuit to give full play to the function of the kinetic energy system. The entire hydraulic system is compact and the pipeline layout is reasonable, reducing the use of hydraulic pipe joints and elbows, thereby reducing the heating factor of the hydraulic system, and effectively ensuring the normal and reliable operation of the hydraulic system.

6. Olietanken er designet med rimelig volumen og høj strukturel stivhed. Der er en skillevæg mellem oliereturporten og oliesugeporten, hvilket effektivt reducerer opvarmningen af ​​hydraulikolien.


Andre funktioner

1. Add a high pressure filter to the hydraulic system. That is, the hydraulic oil needs to pass through a high-pressure filter before entering the pipeline and hydraulic control valve. (The high-pressure filter comes with an alarm) 2. Independent air cooling: The machine adopts a large air volume air cooling machine to control the oil temperature of the hydraulic oil within the normal use range. At the same time, the air-cooled machine page solves the inconvenient problem of the water-cooled machine covering an area to reach the water source. 3. PLC hand-automatic control box. It can be installed and replaced manually and automatically. With remote control operation, it can realize remote start, stop and automatic operation. 4. Pushing chute with gland: It can realize automatic feeding, and the material can be cut along the gland preparation by pushing the main shearing machine. 5. Special universal connection device at the front end of the cylinder rod. Effectively protect the cylinder rod from damage.
Produktfordele

1. It adopts the scrap steel shaping and segmented feeding method with upper compression and compression on both sides, and the design of large bins, so it has good applicability to scrap steel materials and high density after shearing. 2. The material box has a large opening area, which is suitable for machining materials, loose heavy waste, light and thin steel scrap, automobile shells, large irregular light steel structural parts, steel pipes, steel plates, channel steels, I-beams, steel bars and other profiles. , Easy to put into the material box, fully enlarged the equipment utilization. 3. The use of PLC automatic control touch screen control panel automatic integrated control, and a multi-angle full-process monitoring system, which is convenient for users to control and track the use of equipment throughout the process. Stable and reliable operation, optional wireless remote control device, single-person operation production line supporting equipment. 4. Adopting reliable large-flow logic valve control, independent filtering and cooling system, can ensure the efficient and stable operation of the system. The comprehensive application of constant power variable and differential fast technology can save about 30% while ensuring output. The energy consumption per ton of scrap steel processing is lower than the standard requirements of the same industry.

technical parameter