Denne Y83 / T-100 ballepressere til udstødningsskrot anvendes for det meste i metalsmeltningsfabrikken og skrotmetalgenbrugsstation med lavt krav til produktion. Det er den mindste blandt vores metalpresser. Betjent manuelt gør dette produkt ballen i lille størrelse på 200 × 200 mm praktisk til bevægelse og smeltning. Ballen er yderst velegnet til at blive sendt til metalsmelteovnen i lille størrelse med høj effektivitet, hvilket forbedrer smeltehastigheden. Flere oplysninger om skrotballepresseren fås fra vores salgskoncern.
Technical Parameters:
Scrap Steel Balers-Side Push out |
|
Model |
Y83 / T-100 |
Cylinder pushing force |
100 ton |
Maksimalt arbejdstryk |
25 MPa |
Komprimér rumstørrelse |
1000 × 600 × 500 mm |
Balledimensioner (L×W×H) |
200×200mm |
Motor |
11kW |
Capacity |
2-3ton / h |
Theoretical dry cycle time |
100 sek. |
Maks. tykkelse kan være tryk |
2-3mm |
Driftsmetode |
Hand Valve Control |
Balleudtømningsmetode |
Push out |
Pressedimensioner (L×W×H) |
3500×2800×1650mm |
Weight |
4000KG |
1. This side push out baler adopts the hydraulic drive system, reasonable design and compact structure. It is characterized by small volume, light weight, small inertia of movement, low noise, high moving stability, operating flexibility and other strong points.
2. With the incorporated hydraulic and electrical control, this machine is user-friendly and it is easy to realize the overload protection.
3. It is well adapted to different working conditions and has wide applicable range, like processing equipment in the metal recycling and processing unit, furnace charge processing machine in foundry, etc.
4. Vores presser på siden er energibesparende, praktisk til installation, sikker, pålidelig og effektiv under arbejde.
Brief Introduction of Baling Process
At first, the waste material for baling should be loaded into the compacting box manually or mechanically. The Lid cylinder starts to revolve the Lid to the right position for sealing the compacting box completely. Then the ejectors of the side cylinder and the main cylinder squeeze the waste materials into bale. Relying on the locking door cylinder, the locking door will be opened. The ejector of the main cylinder will push the bale out of the compacting box, finishing the baling process.
Ekstraudstyr
Conveyor Feeding
Olievarmer
Oil cooler
Dieselmotordrev
Ansøgninger
Ikke-jernholdige metaller
Coppers
Aluminium dåser
Aluminum Windows
Skrot aluminium
25 Liter Drums
Dåser
Stålspåner
Aluminiumspåner
Aluminum Sheets
Aluminium og kobbertråde